To set the recording schedule you’ll need to go to Main Menu>Configuration>Schedule>Record Plan. In that section, you’ll have access to each channel’s recording schedule. The camera’s will automatically start and stop, recording, at desired times. If you want to set up only motion recording to each camera, select “Setting” on the right-hand side for the desired day. Choose MD for Motion Detection for the day and set a desired time, if not all day. Then you can copy the schedule to other days at the bottom. Click apply then ok, then apply again. You can now click copy at the bottom and copy the schedule to other channels as well. Or choose another channel at the top to setup a different schedule.