Please use the following steps to set up push notifications. Turn on alarm for all devices added. The device must be added using an IP address in Menu>Devices for this to work. Please note, for this to work outside the local network you will have to setup port forwarding for the system.
Before configuring the application, we must setup the NVR/DVR for push notifications. Go to Main Menu>Camera>Motion. Then choose the camera you would like to setup the notifications for. Once you are on the desired camera page, go to “Settings” then to “Linkage Action” at the top. Make sure “Notify Surveillance Center” is checked then click apply then ok. Now we will head over to the LaView Net application.
- Tap on the menu icon on the top left and go to Alarm then tap on Set Alarm Notification.
- Turn on the notification for the device needed.
- A notification will appear in the notification bar, tap it to check on motion alarms. (New alarms in red)
- Tap on the camera link iconto check the live view or the remote playback.